product-details -50%

Green Galaxy Cosmic Pink HSA Water Based Ink

$29.00 $57.99
0 Reviews

Approximate Pantone Value: 189U

Explore all the radiant shades in the cosmos. Easy for man, planet, and screen printer, Green Galaxy’s Cosmic Pink ready for use water based ink is out of this world. Cosmic Pink is specially formulated to stay wet while printing, cover fabric, and wash extremely well. Not only is it easy to use but it feels amazing on the garment and can even be printed on uncoated paper for poster printing. After a day of printing, simply clean Cosmic Pink with water or scoop the left over ink back into the container where it will rejuvenate itself overnight.

General Information

Ready-to-use water based ink for screen printing on fabrics. Can be printed on polyester or dye migrating fabrics with optional use ofGreen Galaxy Warp Drivelow cure catalyst.

Mesh Guidelines

Can be used with any mesh between 156-305.

Stencil/Emulsion Guidelines

We recommend using either a water resistant emulsion likeGreen Galaxy CryoCoatand degreasing withGreen Galaxy CryoPrepdegreaser. For extended life and long runs it is recommend to post expose the screens or use an emulsion hardener like Ryonet Harden-X.

Mixing info

This product can be mixed with other Green Galaxy HSA Water Based Inks.

Printing Instructions

Load screen with plenty of ink. Flood screen prior to printing. Green Galaxy HSA Water Based Ink can be printed with a push or pull squeegee stroke. After printing, flood screen allowing ink to sit on top of image to avoid drying. If screen clogs or exhibits dry ink in the print, re-flood and aggressively print again, this should clear the screen. If it does not clear the screen, spray a small amount of warm water into the stuck areas of the screen and wipe out with a rag. If you are leaving your screen for an extended period of time be sure to leave your screen flooded completely. If your ink begins to scale over, spray with water to rewet ink. Green Galaxy HSA Water Based Ink can be printed with other water based inks and with plastisol inks.

Flashing Instructions

For flashing, forced air flash is optimal. Flash until dry to the touch.

Printing on an under base

Green Galaxy HSA Water Based Ink colors can be printed on top ofGreen Galaxy Comet White, or discharge under base. Ensure that the under base is properly flashed so that it is dry before printing color on top. Perform wash test to ensure inner layer adhesion.

Curing Instructions

Printed fabric should be cured for a minimum of 90 seconds at 360F. Ideally, printed fabric should be cured for three minutes at 300-320F.

Testing/Precautions

After prin

Add a Review

Your email address will not be published. Required fields are marked *