Warning: Undefined array key 0 in /www/wwwroot/joypadcove.com/wp-content/themes/moban8_v260519/woocommerce/content-single-product.php on line 66
product-details -50%

NEEWER Q3 200Ws 2.4G TTL Flash With QPRO Trigger

$125.00 $249.99
0 Reviews

Categories :
Product overviews of the NEEWER Q3 200Ws Strobe Light With QPRO Trigger

Description

  • Portable Flash Strobe– The NEEWER Q3 is a lightweight and powerful flash, boasting 200w of power at only 626g. The flash is portable and capable of being stored and transported in your pocket. It’s great for traveling photographers.Note: Q3 Firmware can be upgraded if incompatibility issue occurs.
  • Optimized Performance– Powerful Flash with High GN58 (ISO100, @35mm), 200Ws of Power Adjustable in 8 Steps from 1/128 to 1/1, and Flash Duration as Short as 1/15380 sec, the 14.4V 3200mAh battery offers 500 full power flashes with 0.01-1.8 sec fast recycling.
  • TTL/Manual/Multi Flash Modes– Q3 has three flash modes: TTL, Manual, and Multi (Stroboscopic). Fully Support Flash Exposure Compensation; 1/8000s High-Speed Sync; Manual outputs the user’s choice of power, modeling light, and first/second curtain sync. Multi controls the stroboscopic rate up to 90 times (99 Hz). Support S1, S2 mode, C.Fn custom setting (F3: Support Masking function when using with QPRO Trigger and in manual mode), etc.
  • Built-in NEEWER 2.4G wireless system– Pair the included Q-Pro Trigger with the Q3 strobe in the same channel and control it remotely from up to 328’/100m away. The QPRO trigger features 5 groups and 32 channels for easy connection.
  • Stable Color Mode & Even Lighting– Stable color temperature at 5600200K over the entire power range. The included 6″ x 5″ softbox diffuser helps produce soft, even light, allowing you to capture the perfect shot. Cooling vents on both sides for overheat protection and prolonged service time. There is also a 3.5mm sync line jack and a type C firmware upgraded port. Battery charger, power cable, and stand mount bracket included.

Specifications

  • Power: 200W
  • Guide Number: 58
  • Material: Plastic and Rubber
  • Flash Modes: Wireless Off, TTL/M/MUTIL
  • Sync mode: HSS(up to 1/8000s), first curtain sync, and second curtain sync
  • Optic Slave Flash: S1/S2
  • Color Temperature: 5600200K
  • Delay Flash: 0.01~30 seconds
  • Stroboscopic Flash: Provided (up to 90 times, 99Hz)
  • Flash Output: 1/1 to 1/128
  • Flash Duration: 1/220s to 1/15380s
  • Recycling Time: 0.01-1.8 seconds
  • Flash Exposure Compensation(FEC): Manual. FEB: +/-3 stops in 1/3 stops increments
  • Wireless 2.4 G Ra
Add a Review

Your email address will not be published. Required fields are marked *